If you have been around compressed air systems, our blogs, or even optimized installations of point of use compressed air products, you will see point of use filtration in place. These filters come in a plethora of sizes, shapes, and specifications. Here at EXAIR we recommend to always keep a point of use filtration solution in place. This would include an auto-drain filter separator, as well as an oil removal filter.
So why do we have two instead of one? Could you use just the oil removal filter rather than two? Well, the answer lies in an optimized installation that will also carry with it a lower total cost of ownership. The auto-drain filter separators from EXAIR have a filter element which takes the air to a 5 micron level of filtration. (Except for the model 9004 which filters down to 20 micron.) The Oil Removal Filters have a coalescing filter element which filters to a 0.3 micron level for the finest debris/mists that may be contained within the compressed air stream. One reason for the separation is when a system is oil-free, the finer filtration level may not be needed. Also, by catching the bulk of material with the standard auto-drain filter and then leaving the finer filter to catch the residual amounts liquid that had been finely atomized within the stream of compressed air. This finer filter costs more so using it to catch larger particulate and risking it becoming clogged quicker will increase the total cost of ownership of the point of use compressed air product it is hooked to, hence never first and sometimes last. After the point of use filtration then placing the point of use pressure regulator and solenoid valves are next. This is all a better way to reduce risk of these being damaged from dirt and contaminants in the air lines. Total cost of ownership reductions all point to a better sustainability of any product.
To better showcase the importance of filtration, here’s a brief video I did a while back that visualizes just what one can see out of a compressed air line with minimal moisture introduced.
As you can see, keeping the point of use air filtered protects your process and decreases the total cost of ownership for your compressed air point of use product. If you would like to discuss other ways we can improve efficiency within your facility and help ensure you are getting the longest life out of your products, please contact us.
Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF
